Straight valve with soldering nipple with screw connection attached to the inlet and outlet with conical soldering nipple and union nut for 4mm pipe. The flow direction is engraved on the valve body. The soldering nipples can be soldered soft or hard as required. The valve is made entirely of brass, only the spindle is made of stainless steel. The straight-through valve is completely brazed and sandblasted. There is also an adjustable stuffing nut with a seal on the spindle. This valve can be used in steam pipes or water pipes. Thanks to its true-to-original appearance, it is an enrichment for every model steam system. Thanks to the union nuts and soldering nipples, it can be quickly separated from the system or quickly reinstalled if necessary. The valves seal very reliably and are very durable.Straight valve with soldering nipple 4mm pipe Height approx. 37 mm Length over screw connection 47 mm Diameter spindle: 2mm Screw connection with conical solder nipple and union nut for 6mm pipe Stainless spindle Straight valve with soldering nipple 6mm pipe Height approx. 47 mm Length over screw connection 52 mm Diameter spindle: 3mm Screw connection with conical solder nipple and union nut for 6mm pipe stainless spindle

Model building angle valve with soldering nipple for installation in steam pipes or water pipes in model building. With these angle valves you can regulate the steam supply to your steam machines by hand. The soldering nipples can be hard soldered or soft soldered. After the nipples have been soldered onto the steam line, the valve can be installed very easily. Dismantling is also very easy with the union nuts. The beautiful valves integrate perfectly into any steam system. Please note the valve for 4 mm pipe has two soldering nipples, the valve for 6 mm pipe has one soldering nipple and an M8x0.75 mm thread with lock nut.Model making Angle valve with soldering nipple 4mm pipe Input and output: screw connection with conical solder nipple Height approx. 37 mm Length overall 30 mm Diameter spindle: 2mm Screw connection with conical solder nipple and union nut for 4mm pipe Stainless spindle Model construction angle valve with soldering nipple 6mm pipe Here you will find suitable Solder connection sleeves   Input and output: screw connection with conical solder nipple / M8x0.75 mm with lock nut Height approx. 47 mm Length over screw connection 35 mm Spindle diameter: 3mm Screw connection with conical solder nipple and union nut for 6mm pipe stainless spindle

Angle valve with flange for installation in a model steam system. The valve comes with all required seals and screws. With these angle valves you can control both water pipes and steam pipes. The valves can also be mounted on the boiler. The angle valves are mainly made of brass and hard soldered. The spindle is made of stainless steel and is sealed by a union nut with a stop bushing. Thanks to the flanges, the angle valves have a very true-to-original appearance and enrich any steam system. Please note: The valve for 4 mm pipe has two flanges, the valve for 6 mm pipe has one flange and a thread M8x0.75 mm.Angle valve with flange 4mm pipe Input and output: flanges Height approx. 42 mm Length without soldering flange: 20mm Diameter spindle: 2mm stainless spindle Flange diameter: 16 mm  Hole circle flanges 11 mm, 4 holes 2.2 mm Scope of delivery angle valve with flange 4mm pipe :  Shut-off valve 2 solder flange 2 seals 8 matching model screws with nuts Angle valve with flange 6mm pipe Inlet and outlet: flange / M8x0.75 mm  < li>Height approx. 60 mm Length without soldering flange: 25mm Diameter spindle: 3mm stainless spindle Flange diameter: 18 mm Hole circle flanges 13 mm, 4 holes 2.7 mm Scope of delivery Angle valve with flange 6mm pipe:Shut-off valve 1 soldering flange 1 gaskets 4 matching model screws with nuts

Globe valve with flange for installation in a steam system. The valve is predominantly made of brass. The spindle is made of stainless steel and is sealed by a union nut. The optimal flow direction for the valve is engraved. The flanges give this straight-through valve a particularly true-to-original appearance. The valves are an eye-catcher in every steam system. You can install the valve on the boiler as well as in steam pipes or water pipes. The valves are supplied complete with seals, flanges and the appropriate model building screws. Straightway valve with flange 4mm pipe  Input and output: flanges Height approx. 35 mmLength without soldered flange: 25mm Diameter spindle: 2mm stainless spindle Flange diameter: 16 mm Hole circle Flanges 11 mm, 4 holes 2.2 mm li> Scope of delivery straight valve with flange 4mm pipe: Shut-off valve 2 solder flange2 seals 8 matching model screws with nuts Straightway valve with flange 6mm pipeInlet and outlet: flangesHeight approx. 45 mmLength without soldering Flange: 30mmSpindle diameter: 3mm stainless spindleflange diameter: 18 mmHole circle flanges 13 mm, 4 holes 2.7 mmScope of delivery straight-through valve with flange 6mm pipe: Shut-off valve 2 solder flange 2 gaskets8 matching model screws with nuts

This safety valve with weight is made of brass, the lever on which the weight hangs is made of aluminum. A stainless ball and spring seal the valve. The screw-in thread of the safety valve is M8x0.75 mm. Due to its beautiful appearance, it is ideal for steam model building. The pressure relief valve is very delicate and cleanly manufactured.It is an eye-catcher for every steam boiler. You can mount the safety valve with weight directly on your boiler as it is designed for high temperatures. A safety valve is also necessary for every steam boiler in model building to prevent the boiler from developing too much pressure. In doing so, you protect your steam boiler and your own health. The safety valve is set to 4bar, but can be adjusted by changing the weight. You can find the appropriate soldered sockets also in our shop:M8x0.75 solder socket Dimensions Safety valve with weight for steam model :  Height with thread 56mm Length overall 70mm Lever length 70mm SW 11mm