Angle valve with flange
Product number:
1311
EAN:
4262412151305
Product information "Angle valve with flange"
Angle valve with flange for installation in a model steam system. The valve comes with all required seals and screws. With these angle valves you can control both water pipes and steam pipes. The valves can also be mounted on the boiler. The angle valves are mainly made of brass and hard soldered. The spindle is made of stainless steel and is sealed by a union nut with a stop bushing. Thanks to the flanges, the angle valves have a very true-to-original appearance and enrich any steam system. Please note: The valve for 4 mm pipe has two flanges, the valve for 6 mm pipe has one flange and a thread M8x0.75 mm.
Angle valve with flange 4mm pipe
- Input and output: flanges Height approx. 42 mm
- Length without soldering flange: 20mm
- Diameter spindle: 2mm stainless spindle
- Flange diameter: 16 mm
- Hole circle flanges 11 mm, 4 holes 2.2 mm
Scope of delivery angle valve with flange 4mm pipe :
- Shut-off valve
- 2 solder flange
- 2 seals
- 8 matching model screws with nuts
Angle valve with flange 6mm pipe
- Inlet and outlet: flange / M8x0.75 mm < li>Height approx. 60 mm
- Length without soldering flange: 25mm
- Diameter spindle: 3mm stainless spindle
- Flange diameter: 18 mm
- Hole circle flanges 13 mm, 4 holes 2.7 mm
Scope of delivery Angle valve with flange 6mm pipe:
- Shut-off valve 1 soldering flange
- 1 gaskets
- 4 matching model screws with nuts
Manufacturer "Bengs Modellbau"
Bengs Modellbau
Im Kirchfelde 6
31675 Bückeburg
info@bengs-modellbau.de
Related links of the manufacturer
Login