Blockade braze / phosphorus-tin-silicon braze
Product information "Blockade braze / phosphorus-tin-silicon braze"
Blockade® braze is a phosphorus-tin-silicon braze for soldering copper and brass with a very low working temperature (650°C). This hard solder can be used as an alternative to the significantly more expensive Ag-55 silver solder (working temperature 630°C). Blockade has good flow properties, the soldering gap fills very quickly and forms an evenly formed groove at the soldering point with a smooth surface.
Blockade® brazing solder is suitable for hat soldering copper and copper alloys, such as brass, bronze, gunmetal. You will receive a flux-coated rod from us and do not need any other additives or fluxes. The flux-coated brazing rods are suitable for all flame brazing processes as well as for induction heating and oven brazing. Blockade is used in the refrigeration, air conditioning and electrical industries. We at Bengs Modellbau are now increasingly using brazing solder in our model making workshop.
In order to keep shipping costs as low as possible, we cut the brazing rods into 2 equal parts. You will then receive 2 pieces from us with a length of 250 mm. For larger quantities or when sending parcels, you will receive the brazing rods in the original length of 500 mm.
Properties flux coated phosphorus-tin-silicon braze blockage
- Diameter: 2mm
- Length: 500mm
- Phosphor-tin-silicon alloy
- Working temperature: 650C°
- No additional flux required
- Cadmium-free
The easiest way to remove the contamination caused by the flux after brazing with the phosphorus-tin-silicon brazing solder blockage is with our Abrasive fleece.
Hersteller
Verantwortliche Person
Login