Chrom Powder 250g
Product information "Chrom Powder 250g"
With this powder you can powder coat components with a chrome-like look. The powder is processed in the same way as our standard powders. It is first applied with the Power Coat 4 PRO powder gun. Unfortunately, processing with our small powder gun is not possible. After application, the powder is baked at 180°C. After the component is in the oven, wait until the chrome powder begins to shine, then the components should be baked in the oven for another 15-20 minutes. After cooling, the powder-coated part is immediately ready for assembly or further processing.
The surface of the powder runs very smoothly, even small unevenness in the material is evened out by the powder. Compared to real chrome, the shine here is a little milkier. Without an additional clear coat layer, the powder coating is relatively sensitive.
An additional layer of clear varnish coating powder significantly increases the mechanical strength, but also reduces the mirror effect. This makes the chrome shine even milkier. If the parts are only for decoration or are only subject to minimal mechanical stress, you can do without the clear coat. However, if the load is higher, the powder should definitely be covered with clear varnish.
The coating powder is filled into plastic buckets so that the powder remains permanently dry. Here you will find standard colors RAL Powder coating in our shop.
Bengs Modellbau
Im Kirchfelde 6
31675 Bückeburg
Login