Displacement oiler for model steam
Product number:
1202
EAN:
4262412151435
Product information "Displacement oiler for model steam"
The displacement oiler for steam model making is made of brass, then brazed and sandblasted. The oiler is installed in the steam supply line to the machine. The oil filler plug seals with a cone and O-ring. The bottom screw has an M6x0.5mm thread. The glass cylinder made of Schott Duran glass is melted on both sides. In addition, the glass cylinder is sealed on both sides with an O-ring. The stud bolts and nuts are made of stainless steel. To adjust the amount of oil, the oil hole Ø 0.7mm can be drilled out.
With this displacement oiler you can add another beautiful detail to your model steam system. The hot steam oil is filled in at the top and the condensate can be drained using the lower drain screw. Of course, you can also fill in the hot steam oil with a syringe, and the condensate can also be sucked out from above using the syringe cannula without opening the drain screw at the bottom .
Dimensions of glass displacement oiler
- Screw connections on both sides with conical soldering nipple for 4mm pipe
- Diameter: 16 mm glass cylinder visible 31 mm
- Height: 68 mm
- Width: 21 mm
- Length: 49 mm
- Pressure test with 6 bar< /li>
Manufacturer "Bengs Modellbau"
Bengs Modellbau
Im Kirchfelde 6
31675 Bückeburg
info@bengs-modellbau.de
Related links of the manufacturer
Login