Die aus hochwertigem Edelstahl gefertigten Spikes sorgen für eine wesentlich bessere Traktion IhresScheppach Mähroboters. Dadurch wird ein festfahren und ein anschließendes eingraben der Antriebsräder des Mähroboter verhindert. Das Durchdrehen der Standardräder führt oft dazu, dass im Randbereich des Rasens kahle Stellen entstehen. Da sich der Rasenmäher immer wieder an diesen Stellen festfährt, erholen sie sich nur sehr langsam. Mit Spikes erhält der Rasenmäher jedoch mehr Traktion und gräbt sich nicht mehr ein. Mit Spikes haben sie deutlich weniger Fehler und Ausfälle beim Betrieb des Rasenmähers. Unsere Spikes sorgen für einen schöneren Rasen und weniger Stress mit Ihrem Mähroboter, auch wenn es mal knifflig wird. Die Spikes werden bei dem Scheppach RoboCut auf der Innenseite der Räder montiert. Gehen Sie dazu folgendermaßen vor: Zuerst die Kunststofffelgen von Hand abziehen. Die Felgen sind im Kunststoff eingeclipst und lassen sich leicht herausziehen. Die M6-Zentralmutter (Schlüsselweite 10) abschrauben und die Unterlegscheibe entnehmen. Das Rad abziehen. Das Rad des Mähroboters mit der Rückseite nach oben legen, die Spikes zentrieren und mit den Edelstahlschrauben (TX10) am Rad befestigen.  Die Montage erfolgt in umgekehrter Reihenfolge.

With our laying aid, the boundary wire is inserted directly into the prepared slot in the lawn through a steel pipe! You don't need additional plastic nails and you don't have to bend over or work on your knees. You also don't need a second person to insert the cable. You simply insert the cable into your lawn using the laying aid and then close the slot. The easy handling of the EasyMole saves you a lot of time and effort and your robotic lawnmower can start working straight away. This is how the EasyMole installation aid is used First you have to make a slit all around at the right distance from the edge. There are a variety of options for this. You can either use an angle grinder or an edge cutter, but you can also do it quickly with a spade. The slot does not need to be particularly wide. Then insert the boundary wire into the laying aid and quickly pull the laying aid through the resulting slot. The boundary wire unrolls itself from the roll. Finally, close the slot by simply stepping on it. This is what you get delivered Our laying aid for boundary cables is firmly connected to a sturdy steel telescopic tool handle. The handle can be extended to a length of 1.5m. A round wooden rod is used to hold the cable drum and is attached to the handle with a stainless steel clamp. The drum holder can be mounted for right- and left-handed users. The holder provides additional support when holding and the cable drum can unroll easily. Clamp and screws are included. Scope of delivery EasyMole laying aid Laying aid with 1.5m telescopic handle Drum holder with fastening material Instructions With the EasyMole laying aid you can lay boundary cables for robotic lawnmowers much faster than before! Our unique design allows the perimeter wire to be placed directly through a steel tube into the prepared slot in the lawn, without the need for additional plastic nails or having to bend down or work on your knees. Laying the cable does not require a second person. You simply insert the cable into your lawn using the laying aid and then close the slot. With EasyMole you save a lot of time and effort and your robotic lawnmower can start working straight away. This is how the EasyMole installation aid works: First you need to make a slot at the appropriate distance from the edge of the lawn. You can use various tools to do this, such as an angle grinder, edger or spade. The slot does not have to be particularly wide. Then insert the boundary wire into the laying aid and quickly pull the laying aid through the resulting slot. The boundary wire is automatically unrolled from the roll. Finally, simply close the slot by pressing it firmly. The EasyMole laying aid comes with a sturdy steel telescopic handle that can be extended to a length of 1.5 m. A round wooden rod serves as a holder for the cable drum and is attached to the device handle with a stainless steel clamp. The drum holder can be mounted for right- and left-handed users and offers additional support when holding, while the cable drum can be easily unrolled. Clamp and screws are included. Detailed instructions are also included. With the EasyMole laying aid, laying boundary wires for your robot lawnmower is quick and easy. Order now and enjoy the benefits of faster, more efficient installation! Processing and manufacturing of the EasyMole laying aid The EasyMole laying aid is made in Germany and consists of robust 1.5 mm sheet steel and galvanized steel pipe. All parts are welded and then painted, ensuring durability and stability. This tool is suitable for both private and commercial use and is a cost-effective alternative to buying or renting a cable laying machine. 30-day money-back guarantee for the EasyMole laying aid Our highest priority is the quality of our products and your satisfaction with them. That's why we offer a 30-day money-back guarantee for the EasyMole installation aid. You can test the installation aid without risk and you should

With our laying aid, the boundary wire is inserted directly into the prepared slot in the lawn through a steel pipe! You don't need additional plastic nails and you don't have to bend over or work on your knees. You also don't need a second person to insert the cable. You simply insert the cable into your lawn using the laying aid and then close the slot. The easy handling of the EasyMole saves you a lot of time and effort and your robotic lawnmower can start working straight away. This is how the EasyMole installation aid is used First you have to make a slit all around at the right distance from the edge. There are a variety of options for this. You can either use an angle grinder or an edge cutter, but you can also do it quickly with a spade. The slot does not need to be particularly wide. Then insert the boundary wire into the laying aid and quickly pull the laying aid through the resulting slot. The boundary wire unrolls itself from the roll. Finally, close the slot by simply stepping on it. This is what you get delivered Our laying aid for boundary cables is firmly connected to a sturdy steel telescopic tool handle. The handle can be extended to a length of 1.5m. A round wooden rod is used to hold the cable drum and is attached to the handle with a stainless steel clamp. The drum holder can be mounted for right- and left-handed users. The holder provides additional support when holding and the cable drum can unroll easily. Clamp and screws are included. Scope of delivery EasyMole laying aid Laying aid with 1.5m telescopic handle Drum holder with fastening material Instructions With the EasyMole laying aid you can lay boundary cables for robotic lawnmowers much faster than before! Our unique design allows the perimeter wire to be placed directly through a steel tube into the prepared slot in the lawn, without the need for additional plastic nails or having to bend down or work on your knees. Laying the cable does not require a second person. You simply insert the cable into your lawn using the laying aid and then close the slot. With EasyMole you save a lot of time and effort and your robotic lawnmower can start working straight away. This is how the EasyMole installation aid works: First you need to make a slot at the appropriate distance from the edge of the lawn. You can use various tools to do this, such as an angle grinder, edger or spade. The slot does not have to be particularly wide. Then insert the boundary wire into the laying aid and quickly pull the laying aid through the resulting slot. The boundary wire is automatically unrolled from the roll. Finally, simply close the slot by pressing it firmly. The EasyMole laying aid comes with a sturdy steel telescopic handle that can be extended to a length of 1.5 m. A round wooden rod serves as a holder for the cable drum and is attached to the device handle with a stainless steel clamp. The drum holder can be mounted for right- and left-handed users and offers additional support when holding, while the cable drum can be easily unrolled. Clamp and screws are included. Detailed instructions are also included. With the EasyMole laying aid, laying boundary wires for your robot lawnmower is quick and easy. Order now and enjoy the benefits of faster, more efficient installation! Processing and manufacturing of the EasyMole laying aid The EasyMole laying aid is made in Germany and consists of robust 1.5 mm sheet steel and galvanized steel pipe. All parts are welded and then painted, ensuring durability and stability. This tool is suitable for both private and commercial use and is a cost-effective alternative to buying or renting a cable laying machine. 30-day money-back guarantee for the EasyMole laying aid Our highest priority is the quality of our products and your satisfaction with them. That's why we offer a 30-day money-back guarantee for the EasyMole installation aid. You can test the installation aid without risk and you should