These relatively small spark plugs are particularly suitable for model combustion engines. Its metric M10 × 1 thread also fits into smaller cylinder heads. The spark plugs fit into our internal combustion engine and can be used as a spare part. Of course, you can also use the spark plug CM-6 for your own development with our ignition components.
Data of spark plug CM-6 M10x1
Key range: 14.0 mm
Overall length: 36mm
External thread: M10x1
Thread length: 8.6 mm
The Ignition condenser for intermittent ignition is a component which should not be missing. The condenser regulates the strength of the ignition spark. This ignition coil is also installed in the internal combustion engine Karl and can be used as a spare part. You can use this capacitor to create an ignition breaker for model building. This is a solid moped technology that has proven itself over many years. An intermittent ignition is very durable and also times a wrong polung.
Dimensions Capacitor for Ignition condenser
Length: 41mm
Diameter: 18mm
Threaded connection: M4
Use this Ignition interrupter to generate the spark. You can control the breaker directly via a cam or via a ram. This article is a serial product from the moped technology. This guarantees a good quality, long durability and fast availability. You can create your own ignition system from this interrupter. We also use this breaker in the ignition of our internal combustion engine "Karl". It can also be used as a spare part in this model.
Dimensions of the Ignition interrupter
Length: 30mm
Width: 30mm
Height: 20mm
This ignition coil is suitable for installation in an intermittent ignition. This ignition coil is also installed in the internal combustion engine Karl and can be used as a spare part. In the normal case, this coil is used for ignition in mopeds. However, due to its reliability and performance, it is very well suited for model construction. An intermittent ignition usually works very reliably and can be more easily checked for faults than an electric ignition.
Dimensions of ignition coil 12V intermittent ignition
Length: 123mm
Diameter rear: 40 mm
Largest diameter collar: 48 mm
Connection thread: 2x M4
Here you will find a toggle switch with which you can start and stop the ignition of your model motor. The toggle switch is designed both mechanically and electrically robust. We also use this toggle switch for the inflammation of our internal combustion engines. Thanks to the classic design, the toggle switch fits well with the most varied model-motor.
Switching capacity 10 A / 250 V ~
1-pole
Execution ON / OFF
Operating temperature -25 ... + 85 ° C
Switching cycles> 10,000
Mounting Ø 12 mm
screw
Overall dimensions without shield (LxWxH): 29x16x53 mm
Product number:
1504
€4.30*
This website uses cookies to ensure the best experience possible. More information...
