Cylinder tube
€14.10*
Diameter material:
25mm
This tube is a hydraulic cylinder tube. The inside of the tube is very dimensionally stable and wear-resistant. The cylinder tube is suitable as a cylinder sleeve for an internal combustion engine or flame eater. We also use this cylinder tube in our models. We use it for the combustion engine Karl, Stirling engine "Big Laura" and the Flame Eater Jarne. Due to its high wear resistance, the tube has proven itself as a cylinder sleeve for us.
Dimensions of hydraulic cylinder tube 25mm:
Outer diameter: 35mm
Inner diameter: 25mm
Length: 83mm
Material: St52
Suitable Piston rings for this cylinder tube can be found here
Dimensions of hydraulic cylinder tube 30mm:
Outer diameter: 40mm
Inner diameter: 30mm
Length: 86mm
Material: St52
Dimensions of hydraulic cylinder tube 40mm:
Outer diameter: 50mm
Inner diameter: 40mm
Length: 117mm
Material: St52
Dimensions of hydraulic cylinder tube 50mm:
Outer diameter: 60mm
Inner diameter: 50mm
Length: 142mm
Material: St52
Product number:
5300
Brass Ms58 flat material
€14.90*
Strength:
50mm x 2mm
Brass Ms58 flat material is a very good machinable material. Brass is probably the most widely used material in technical modeling. Which is certainly due to the fact that it can be worked very well. It can be milled, turned, drilled, brazed and softened. Many Stirling engines, steam engines and flame eaters in technical model construction are mainly made of MS58 brass. You can order brass flat material in different thicknesses from 2mm to 6mm here at the Bengs Modellbau Shop.
Flat Material Brass Quality: Ms 58 (drilling and turning quality)
Strength F45-50
Flat material 50mm wide
Length 300mm
Product number:
5212
Variants from €3.60*
Cast iron round material
€21.60*
Diameter material:
30mm
Cast iron with lamellar graphite. The surface is peeled on the gray cast iron bars. The round bars are a little over-sized. You can also make a 30mm piston with a 30mm diameter. The material is suitable both for the production of pistons or cylindrical sleeves for model-built motors as well as for the production of plain bearing bushes. We use this material for the pistons at the station "Karl". The round material can be perfectly machined on the lathe and on the milling machine and has excellent running characteristics.
All round bars are 300mm long.
Product number:
5171
Brass round Ms58
€3.20*
Diameter material:
2mm
Brass Ms58 is a very good machinable material. Another advantage of brass is that it is rust-free. It is suitable for turning, milling, drilling and tapping. In addition, it can be well brazed with silver brazing and soldering. These characteristics are very much in line with the technical model builder. Most steam engines, Stirling engines and flame eaters in model making are largely made of MS58 brass. We offer you here in the Bengs Modellbau Shop brass round material in the diameter from 1mm to 50mm.
Features of brass Ms58 round
Round Material Brass Quality: Ms 58 (drilling and turning quality)
Strength F45-50
You always get 300mm long brass Ms58 round sections.
Saving set thin brass Ms 58 / You save 20%
Brass round material 300mm per 1 rod
4mm
5mm
6mm
8mm
10mm
12mm
14mm
16mm
Saving set thick brass Ms 58 / you save 20%
Brass round material 300mm per 1 rod
18mm
20mm
22mm
30mm
Product number:
5092
Brass Ms58 hexagonal
€3.30*
Diameter material:
3mm
This brass Ms58 hexagonal material is very easy to machine and is ideal for turning, milling, drilling and tapping. The material is suitable for self-assembly of screws, model building nuts and other components for technical modeling. You can order different key sizes in our shop, or you can order a set of different diameters.
Features of brass Ms58 hexagon
Hexagonal material brass with different key ranges
Quality: Ms 58 (drilling and turning quality)
Strength F45-50
Length: 300mm
We supply the brass Ms58 hexagon in 300mm sections.
Savings set Hexagon brass Ms 58 / You save 20%
The brass hexagonal material savings set includes 300mm per 1 bar
4mm
5mm
6mm
8mm
10mm
12mm
Product number:
5113
Brass Ms58 square material
€4.00*
Diameter material:
4mm
Square brass in different diameters. This brass is very good machinable and suitable for turning, milling, drilling and tapping. Square braces, fork heads and other components for technical modeling are very well suited to be manufactured from square material.
Features of brass Ms58 square material
Quality: Ms 58 (drilling and turning quality)Strength F45-50
We supply the brass Ms58 square material in 300mm sections.
Saving set square brass Ms 58 / you save 20%
The brass square material savings set contains 1 rod 300mm long
4mm
5mm
6mm
8mm
10mm
Product number:
5134