JB Weld is considered to be the strongest glue in the world! It was developed 30 years ago in the USA and sold millions of times. It is located in almost every household. The 2-component epoxy resin adhesive is universally applicable and creates truly durable connections. With this adhesive, metallic materials such as cast iron, gray cast iron, steel, aluminum, brass, bronze, copper and tin can be cold-welded. The all-purpose adhesive also unbreakably combines wood, glass, ceramic or plastic. J-B Weld sticks everything - permanently and super fast. The all-purpose adhesive consists of 2 components. On the one hand there is the hardener (also called activator), in the red tube, on the other hand the part called by the manufacturer as "steel" in the black tube. This is made of epoxy resin and some other components. Both components are mixed together in equal proportions, whereby the reaction process of the curing (polymerization) is initiated. After mixing the 2 components, JB Weld can be processed for 25 minutes. After 8-15 hours, the adhesive is fully cured. Now, as if it were metal, it can be painted, painted, sawn, doweled, sanded or sanded. JB Weld does not shrink and tear during the curing process. A clean adhesive tape remains clean (as with soldering or welding), a smooth surface remains smooth. This makes JB Weld ideal where high-precision work is required. In the commercials of the manufacturer it is advertised that this all-purpose glue can reliably stick cracks in engine blocks. The cured adhesive is water resistant / steam resistant, withstand temperatures up to 300 ° C, oils, acids and chemicals (even battery acid). From the hands, it can be washed with water and soap after processing. Does not smell, since without solvent. In addition, the JB world is ideally suited for filling and gluing parts that are to be coated with the EasyCoat powder coating system. Opened for 5 years! Contents: 2 x 28g Permanently joins metal, plastic, ceramics, wood, glass, masonry, etc.   Ideal for filling cavities in castings   Seals pipes and fittings   Instead of welding, soldering, doweling   Can be drilled, painted, sanded   Temperature resistant up to 300 ° C   Water resistant and steam test   Resists oils, acids and chemicals   Tensile strength: 278 kg / qcm   Suitable for filling and gluing powder coating parts

The center punch set consists of 25 center punches made of hardened steel. The center punches are suitable for transferring holes from one component to another. To do this, a centering center punch is inserted either into the hole of an existing component or into the hole of a template and transferred to the second part. The center punch set is suitable for use in mechanical engineering, steel construction, crafts and hobbies. The grain diameters increase by 0.5mm from 1mm to 13mm. The actual dimensions of the center punches are 0.05mm below standard dimensions. All 25 center punches are 120mm long. The center punches are delivered with a clear metal stand. Centering center punch set (25 pieces) from 1mm to 13mm 0.5mm increments

This hot steam oil for model building is ideal for the operation of real steam models. The hot steam oil is very viscous and also adheres very well to hot components. When a model steam generator is operated with steam, normal oil (for example, fine mechanics oil) is washed out very quickly by the steam. Since the hot steam cylinder adheres very well, it remains in the cylinder, the piston and the piston rod for a long time. You can also use the hot steam oil in our displacement oil. Due to its viscous nature, the hot steam oil is not suitable for lubricating Stirling engines or flame eaters.

The Flame eater oil from Bengs Modellbau is particularly suitable for lubricating the pistons and cylinders of flame-eaters in technical model construction. The flame-eater oil is an oil, based on white oil. It is liquid as water, odorless and biodegradable. Another important advantage of our Flame-eater oil for use in technical model construction is that it does not attack paints and varnishes. When the flame eater or parts of the flame eater exceed the temperatures of 150 ° C, the flame-eater evaporates and produces a beautiful white smoke. The oil we offer is normally used in the aircraft RC model building as smoke oil.   Many oils leave behind residues in the hot vacuum engine, which cause the piston to run smoothly in the cylinder. Likewise, when lubricating with graphite powder, deposits of graphite dust are produced over time, which lead to the piston becoming dull. These residues must be removed from time to time. For a long time we asked ourselves:   Which oil is best used for a flame eater or vacuum motor? And here is finally the solution! Flame eater oil from Bengs Modellbau. With the oil from Bengs Modellbau you do not have the described disadvantages and also the following advantages:   Flame eater oil is liquid like water   Odor neutral biodegradable It does not attack lacquers Best suited for technical modeling Made in Germany No dangerous good according to UN, IMO, ADR / RID, IATA / ICAO. Contains: 100ml   E-mail of a satisfied customer: I have today the Flammenfresseröl from you for my Stirlingmotor tried. Until now, I have oiled the model engines with WD 40. But the oil of you is a show! The high speeds I got with it are not comparable with WD 40. And all without residue and no hardening. Simply super! Best regards Video Flame eater oil   

For all machining processes that place high demands on a cutting and cooling lubricant. Particularly suitable for thread cutting, reaming, sawing, drilling, turning, scraping, punching and milling. Can be used for all types of steel, cast iron and stainless steel. Our cutting oil is also suitable for all non-ferrous metals, copper, brass, aluminum and their alloys. Using cutting oil significantly increases tool life. The cutting oil is chlorine-free and age-resistant. Content: 100ml

Our bed track oil / slideway oil is suitable for oiling bed tracks on your lathe or for the guides of your milling machine. The slideway oil is naturally acid-free. It lubricates and protects your guides from corrosion, especially if you use water-mixed cooling lubricants. Special additives in the bed track oil prevent the jerky sliding ("stick-slip") of machine tools - tables, guides and ensure constant sliding behavior even at the finest feed rates. Content: 100ml  

Autosol Chrome Shine is a world-famous and internationally awarded cleaning, care and polishing agent for all metallic surfaces. Dirt and rust can be easily removed in one operation. Thanks to the balanced formulation of the active ingredients, in addition to excellent cleaning, surface protection is applied to the metals. Achieves a brilliant high gloss. Ideal for polishing brass, copper or aluminum. Simply apply a small amount of Autosol Chrome Shine to a cloth and polish until the desired result is achieved. For round parts, simply clamp them in the lathe and polish with a cloth. Contents: 75 ml

The flat emery file with a wooden handle is available in different grit sizes. The cleanly cut wooden strips are covered with sandpaper. The files are ideal for working on wood or metal. We also like to use the emery files in our workshop. Dimensions of the emery files: Length:             250 mm Working length:   210 mm Width:              20 mm Height:               6 mm Grain:          K100, K220, K320, K600

This oil-based abrasive paste with synthetic diamonds is suitable for all polishing and grinding work on hard materials such as ceramics, glass, metals and hardened steels. The diamond grinding paste is delivered in a syringe and is therefore very easy to dose. We use the grinding paste to grind valve seats on hissing taps or to grind the valves on combustion engines. There are 2 different grit sizes to choose from: 20µm (extra fine) and 40µm (fine). 1 µm = 1/1000 mm. Properties of the diamond grinding paste Content: 5g Grain size: 20µm (extra fine) / 40µm (fine)

Hylomar universal Sealant is a permanent elastic sealant. This means that the sealant never completely cures and can be easily dismantled again and again. This is a decisive advantage for the model builder. The sealed components can be dismantled simply and without destruction, as can often occur once in a Stirling engine or a flame eater. You have a further advantage if you use different material combinations brass - steel, stainless steel - aluminum or metal - plastic. The sealant can compensate for the different expansion. Hylomar universal seal has a thermal application range of -50C ° to 250C ° (in the short term, too). The seal is resistant to fuels, oils, water, steam and antifreeze. You can also use the permanently plastic universal seal for sealing the surface as well as for sealing pipe fittings. Hylomar Durable universal Sealant   Base: Polyurethane Colour Blue Thick paste Density: 1.17 g / cm⊃3; Coating thickness: 0.15-0.2 mm Contains: 80ml Temperature resistant from -50 ° C to +250 ° C   Instructions: The sealing surfaces must be clean and grease-free. Hylomar Thinly apply a continuous plastic universal seal on both sides. If the solvent is vented after approx. 10 minutes, the parts can be assembled. After a further 15 min. Be repeated. For single-planked surfaces, one-sided order is sufficient. At room temperature, Hylomar Permanent Plastic Universal is unlimited in duration.

This triangular honing stone made of corundum is suitable for honing HSS and solid carbide tools. Due to its small dimensions, the sharpening stone can be used well when the cutting tools are still clamped. With the whetstone, both milling cutters and turning steels can be sharpened. The whetstone is very suitable for work in model making. Dimensions corundum sharpening stone triangular: Width: 10mm Length: 100mm Material: corundum

Polishing wax in bars. We have the polishing wax in two different qualities. The white polishing wax is intended for glossy polishing and is ideal for polishing parts to a shine after mechanical treatment. The blue polishing wax is finer and suitable for the final finish. Stainless steel, aluminum and brass are particularly easy to polish to a high shine. The wax layer also ensures good preservation of the polished components. Especially with steam engines it is very popular to polish all parts to a high shine. You can use this polishing wax for all common polishing discs. Polishing paste polishing wax available in: "blue", ideal for high-gloss polish 110x35x25mm "white", ideal for glossy polish 110x35x25mm

The marble pencil is made of rubber-elastic bound normal corundum and can be used universally in technical model making. The marbling pen is suitable for fine grinding and polishing, as well as for applying optical effects to brass, copper, stainless steel, steel and aluminum. The elastic bonding of the abrasive grain allows a very fine polish to be achieved.   Dimensions of marbling pen polishing abrasive body: Diameter 32mm Height of the grinding wheel 32mm Shaft diameter 6mm

Screw locking prevents all threaded parts made of metal and non-ferrous metal from unintentionally loosening the connection due to vibrations or shock loads. The liquid-applied adhesives fill gaps in the thread and harden to form a high-strength plastic. The threads secured in this way are simultaneously sealed and protected against corrosion. Resistant to all common operating media. The screw locks are temperature resistant up to 150C°. and can be used anywhere in steam model making and technical model making. The following screw locks are available: Screw locking screw adhesive (medium strength) 10g  Screw locking screw adhesive (high strength) 10g   

This polishing ball or polishing ball made of Molton cotton has a diameter of 75mm and is firmly mounted on a mandrel. The polishing ball is suitable for use in die grinders, drills, pillar drills or cordless drills. Ideal for polishing hard-to-reach areas such as internal and external curves. The very fine Molton quality is also ideal for polishing non-ferrous metals and plastic surfaces to a shine. The polishing ball can be used with all commercially available polishing waxes or polishing pastes. The polishing balls are manufactured by Kaindl Schleiftechnik in Germany. Properties and dimensions of the polishing ball: Diameter: 75 mm Loading mandrel: 6 mm diameter

A Velcro disc 300mm diameter for disc sanders. The Velcro pad is self-adhesive and is stuck onto the sanding disc of the disc sander. Changing the sanding discs with Velcro backing is then quick and easy. Suitable for all disc sanders with a disc diameter of approx. 305mm, e.g. quantum disc sander TS 305. You can also find suitable sanding discs with a diameter of 300 mm in our shop. Dimensions Velcro discs 305mm for disc sander Diameter: 300mm  

Abrasive linen economy roll in a practical dispenser box with viewing slot for fill level detection and high-quality tear-off knife. The abrasive cloth is made of a robust cotton fabric and is oil and petroleum resistant. The fabric is sprinkled with normal corundum and fully resin-bound. All grain sizes have a width of 25 mm and a length of 50 m. The abrasive cloth has a high grinding performance and a long service life. It is suitable for all common materials in the model making workshop: brass, stainless steel, steel, gray cast iron and aluminum. The tail tissue is of industrial quality and made  in Germany. The emery cloth is available in 3 different grain sizes. Technical properties of the emery cloth Abrasive corundum Saving rolls width 25 mm Economy rolls length 50 m Grain size 120(medium), 240(fine), 320(very fine)