Flussmittel ummanteltes Silberlot

For the somewhat coarser soldering work in the model making, craft or industry, we have flux coated silver solder bars with the diameter 1,5mm or 2mm. The flux range for the silver solder is between 500 ° C and 800 ° C. A further addition of brazing flux is not necessary. Of course, these silver solder bars also consist of the high-quality Lot L-Ag55 with the working temperature of 630 ° C. Especially when brazing brass, a low working temperature is of crucial importance. The high silver content in the solder not only reduces the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. Silver solder rods coated with flux are suitable for brazing brass, copper, heavy metals, rusting steels and stainless steel. All materials can, of course, also be joined together. The advantage of these flux-coated silver solder bars is that you do not need any additional flux. In our model magazine you will find a guide how to braze flux-coated silver brace brakes. Flux-coated High-silver Brazing Alloy Diameter 1,5mm or 2mm Length 500mm Silver solder bars L-Ag55 (55% silver) Working temperature: 630C ° No additional flux needed Cd free Video: Flux-coated High-silver Brazing Alloy

We have silver braided bars with a silver content of 55% (L-Ag55) with a length of 500mm. Because of the relatively low melting point of this silver braze, the model builder in the field of technical model building is almost exclusively concerned. The working temperature of this hard solder is 630 ° C. The silver as an alloying component in the solder does not only reduce the working temperature, but also improves the flow properties. Furthermore, silver has the positive property of combining well with other metals. For brazing brass and steel, silver solder flux is essential. The low working temperature of the silver solder bars allows the thermal load to be as low as possible for the processed material. It is important not to heat the workpieces too much, especially in the case of brass. In combination with our silver solder flux you achieve with these silver solder always optimal results. The silver braided bars can be purchased from us in the shop in 2 different diameters. For fine soldering as it often happens in technical model construction we recommend the 1mm rods. The 1mm silver braided bars are easy to carry with the hand and can be easily melted with small burners. For larger parts we prefer the 1.5 mm silver solder bars. With these rods you get faster material to the soldering point if needed. What can be brazed?The following materials can be combined with silver solder: brass, copper, gunmetal, gray cast iron, rusting steels and stainless steel. A combination of the materials among each other is easily possible with this silver braze solder. If the material is not known to you, it is always recommended to solder a piece to the sample beforehand. This allows you to determine whether the materials can be combined with the silver braze.Instructions Brazing with silver solder If you have never worked on silver solder and you are not sure how the exact solder brazing procedure is with silver solder, we can help you before you buy the silver solder. We have created a guide for you in our Bengs Modellbaumagazin on the topic "Brazing with silver solder". Here you can find out what you need and have to consider if you want to solder 2 components with silver solder. Tip: Flux residues and discoloration of the material can be optimally eliminated with our satin brushes or abrasive fleece!Characteristics of the silver solder bars500 mm long. 1mm or 1.5mm diameter Silver solder bars L-Ag55 (55% silver) Working temperature 630 ° C Bengs Modellbau has used this silver solder bars for years.